GlobalIonosphereMapModel.java
/* Copyright 2002-2019 CS Systèmes d'Information
* Licensed to CS Systèmes d'Information (CS) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* CS licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.orekit.models.earth.ionosphere;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.nio.charset.StandardCharsets;
import java.text.ParseException;
import java.util.ArrayList;
import java.util.Collections;
import java.util.HashMap;
import java.util.List;
import java.util.Map;
import org.hipparchus.Field;
import org.hipparchus.RealFieldElement;
import org.hipparchus.analysis.interpolation.BilinearInterpolatingFunction;
import org.hipparchus.geometry.euclidean.threed.FieldVector3D;
import org.hipparchus.geometry.euclidean.threed.Vector3D;
import org.hipparchus.util.FastMath;
import org.hipparchus.util.MathUtils;
import org.orekit.bodies.GeodeticPoint;
import org.orekit.data.DataLoader;
import org.orekit.data.DataProvidersManager;
import org.orekit.errors.OrekitException;
import org.orekit.errors.OrekitMessages;
import org.orekit.frames.TopocentricFrame;
import org.orekit.propagation.FieldSpacecraftState;
import org.orekit.propagation.SpacecraftState;
import org.orekit.time.AbsoluteDate;
import org.orekit.time.DateTimeComponents;
import org.orekit.time.FieldAbsoluteDate;
import org.orekit.time.TimeComponents;
import org.orekit.time.TimeScalesFactory;
import org.orekit.utils.ParameterDriver;
/**
* Global Ionosphere Map (GIM) model.
* The ionospheric delay is computed according to the formulas:
* <pre>
* 40.3
* δ = -------- * STEC with, STEC = VTEC * F(elevation)
* f²
* </pre>
* With:
* <ul>
* <li>f: The frequency of the signal in Hz.</li>
* <li>STEC: The Slant Total Electron Content in TECUnits.</li>
* <li>VTEC: The Vertical Total Electron Content in TECUnits.</li>
* <li>F(elevation): A mapping function which depends on satellite elevation.</li>
* </ul>
* The VTEC is read from a IONEX file. A stream contains, for a given day, the values of the TEC for each hour of the day.
* Values are given on a global 2.5° x 5.0° (latitude x longitude) grid.
* <p>
* A bilinear interpolation is performed the case of the user initialize the latitude and the
* longitude with values that are not contained in the stream.
* </p><p>
* A temporal interpolation is also performed to compute the VTEC at the desired date.
* </p><p>
* IONEX files are obtained from
* <a href="ftp://cddis.nasa.gov/gnss/products/ionex/"> The Crustal Dynamics Data Information System</a>.
* </p><p>
* The files have to be extracted to UTF-8 text files before being read by this loader.
* </p><p>
* Example of file:
* </p>
* <pre>
* 1.0 IONOSPHERE MAPS GPS IONEX VERSION / TYPE
* BIMINX V5.3 AIUB 16-JAN-19 07:26 PGM / RUN BY / DATE
* BROADCAST IONOSPHERE MODEL FOR DAY 015, 2019 COMMENT
* 2019 1 15 0 0 0 EPOCH OF FIRST MAP
* 2019 1 16 0 0 0 EPOCH OF LAST MAP
* 3600 INTERVAL
* 25 # OF MAPS IN FILE
* NONE MAPPING FUNCTION
* 0.0 ELEVATION CUTOFF
* OBSERVABLES USED
* 6371.0 BASE RADIUS
* 2 MAP DIMENSION
* 350.0 350.0 0.0 HGT1 / HGT2 / DHGT
* 87.5 -87.5 -2.5 LAT1 / LAT2 / DLAT
* -180.0 180.0 5.0 LON1 / LON2 / DLON
* -1 EXPONENT
* TEC/RMS values in 0.1 TECU; 9999, if no value available COMMENT
* END OF HEADER
* 1 START OF TEC MAP
* 2019 1 15 0 0 0 EPOCH OF CURRENT MAP
* 87.5-180.0 180.0 5.0 350.0 LAT/LON1/LON2/DLON/H
* 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92
* 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92
* 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92
* 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92
* 92 92 92 92 92 92 92 92 92
* ...
* </pre>
*
* @see "Schaer, S., W. Gurtner, and J. Feltens, 1998, IONEX: The IONosphere Map EXchange
* Format Version 1, February 25, 1998, Proceedings of the IGS AC Workshop
* Darmstadt, Germany, February 9–11, 1998"
*
* @author Bryan Cazabonne
*
*/
public class GlobalIonosphereMapModel implements IonosphericModel {
/** Serializable UID. */
private static final long serialVersionUID = 201928052L;
/** Threshold for latitude and longitude difference. */
private static final double THRESHOLD = 0.001;
/** Geodetic site latitude, radians.*/
private double latitude;
/** Geodetic site longitude, radians.*/
private double longitude;
/** Mean earth radius [m]. */
private double r0;
/** Height of the ionospheric single layer [m]. */
private double h;
/** Time interval between two TEC maps [s]. */
private double dt;
/** Number of TEC maps as read on the header of the file. */
private int nbMaps;
/** Flag for mapping function computation. */
private boolean mapping;
/** Epoch of the first TEC map as read in the header of the IONEX file. */
private AbsoluteDate startDate;
/** Epoch of the last TEC map as read in the header of the IONEX file. */
private AbsoluteDate endDate;
/** Regular expression for supported files names. */
private final String supportedNames;
/** Map of interpolated TEC at a specific date. */
private Map<AbsoluteDate, Double> tecMap;
/**
* Constructor with supported names given by user.
* @param supportedNames supported name
*/
public GlobalIonosphereMapModel(final String supportedNames) {
this.supportedNames = supportedNames;
this.latitude = Double.NaN;
this.longitude = Double.NaN;
this.tecMap = new HashMap<>();
}
/**
* Calculates the ionospheric path delay for the signal path from a ground
* station to a satellite.
* <p>
* The path delay can be computed for any elevation angle.
* </p>
* @param date current date
* @param geo geodetic point of receiver/station
* @param elevation elevation of the satellite in radians
* @param frequency frequency of the signal in Hz
* @return the path delay due to the ionosphere in m
*/
public double pathDelay(final AbsoluteDate date, final GeodeticPoint geo,
final double elevation, final double frequency) {
// TEC in TECUnits
final double tec = getTEC(date, geo);
// Square of the frequency
final double freq2 = frequency * frequency;
// "Slant" Total Electron Content
final double stec;
// Check if a mapping factor is needed
if (mapping) {
stec = tec;
} else {
// Mapping factor
final double fz = mappingFunction(elevation);
stec = tec * fz;
}
// Delay computation
final double alpha = 40.3e16 / freq2;
return alpha * stec;
}
@Override
public double pathDelay(final SpacecraftState state, final TopocentricFrame baseFrame,
final double frequency, final double[] parameters) {
// Elevation in radians
final Vector3D position = state.getPVCoordinates(baseFrame).getPosition();
final double elevation = position.getDelta();
// Only consider measures above the horizon
if (elevation > 0.0) {
// Date
final AbsoluteDate date = state.getDate();
// Geodetic point
final GeodeticPoint geo = baseFrame.getPoint();
// Delay
return pathDelay(date, geo, elevation, frequency);
}
return 0.0;
}
/**
* Calculates the ionospheric path delay for the signal path from a ground
* station to a satellite.
* <p>
* The path delay can be computed for any elevation angle.
* </p>
* @param <T> type of the elements
* @param date current date
* @param geo geodetic point of receiver/station
* @param elevation elevation of the satellite in radians
* @param frequency frequency of the signal in Hz
* @return the path delay due to the ionosphere in m
*/
public <T extends RealFieldElement<T>> T pathDelay(final FieldAbsoluteDate<T> date, final GeodeticPoint geo,
final T elevation, final double frequency) {
// TEC in TECUnits
final T tec = getTEC(date, geo);
// Square of the frequency
final double freq2 = frequency * frequency;
// "Slant" Total Electron Content
final T stec;
// Check if a mapping factor is needed
if (mapping) {
stec = tec;
} else {
// Mapping factor
final T fz = mappingFunction(elevation);
stec = tec.multiply(fz);
}
// Delay computation
final double alpha = 40.3e16 / freq2;
return stec.multiply(alpha);
}
@Override
public <T extends RealFieldElement<T>> T pathDelay(final FieldSpacecraftState<T> state, final TopocentricFrame baseFrame,
final double frequency, final T[] parameters) {
// Elevation in radians
final FieldVector3D<T> position = state.getPVCoordinates(baseFrame).getPosition();
final T elevation = position.getDelta();
// Only consider measures above the horizon
if (elevation.getReal() > 0.0) {
// Date
final FieldAbsoluteDate<T> date = state.getDate();
// Geodetic point
final GeodeticPoint geo = baseFrame.getPoint();
// Delay
return pathDelay(date, geo, elevation, frequency);
}
return elevation.getField().getZero();
}
/**
* Computes the Total Electron Content (TEC) at a given date by performing a
* temporal interpolation with the two closest date in the IONEX file.
* @param date current date
* @param recPoint geodetic point of receiver/station
* @return the TEC after a temporal interpolation, in TECUnits
*/
public double getTEC(final AbsoluteDate date, final GeodeticPoint recPoint) {
// Load TEC data only if needed
loadsIfNeeded(recPoint);
// Check if the date is out of range
checkDate(date);
// Date and Time components
final DateTimeComponents dateTime = date.getComponents(TimeScalesFactory.getUTC());
// Find the two closest dates of the current date
final double secInDay = dateTime.getTime().getSecondsInLocalDay();
final double ratio = FastMath.floor(secInDay / dt) * dt;
final AbsoluteDate tI = new AbsoluteDate(dateTime.getDate(),
new TimeComponents(ratio),
TimeScalesFactory.getUTC());
final AbsoluteDate tIp1 = tI.shiftedBy(dt);
// Get the TEC values at the two closest dates
final double tecI = tecMap.get(tI);
final double tecIp1 = tecMap.get(tIp1);
// Perform temporal interpolation (Ref, Eq. 2)
final double tec = (tIp1.durationFrom(date) / dt) * tecI + (date.durationFrom(tI) / dt) * tecIp1;
return tec;
}
/**
* Computes the Total Electron Content (TEC) at a given date by performing a
* temporal interpolation with the two closest date in the IONEX file.
* @param <T> type of the elements
* @param date current date
* @param recPoint geodetic point of receiver/station
* @return the TEC after a temporal interpolation, in TECUnits
*/
public <T extends RealFieldElement<T>> T getTEC(final FieldAbsoluteDate<T> date, final GeodeticPoint recPoint) {
// Load TEC data only if needed
loadsIfNeeded(recPoint);
// Check if the date is out of range
checkDate(date.toAbsoluteDate());
// Field
final Field<T> field = date.getField();
// Date and Time components
final DateTimeComponents dateTime = date.getComponents(TimeScalesFactory.getUTC());
// Find the two closest dates of the current date
final double secInDay = dateTime.getTime().getSecondsInLocalDay();
final double ratio = FastMath.floor(secInDay / dt) * dt;
final FieldAbsoluteDate<T> tI = new FieldAbsoluteDate<>(field, dateTime.getDate(),
new TimeComponents(ratio),
TimeScalesFactory.getUTC());
final FieldAbsoluteDate<T> tIp1 = tI.shiftedBy(dt);
// Get the TEC values at the two closest dates
final double tecI = tecMap.get(tI.toAbsoluteDate());
final double tecIp1 = tecMap.get(tIp1.toAbsoluteDate());
// Perform temporal interpolation (Ref, Eq. 2)
final T tec = tIp1.durationFrom(date).divide(dt).multiply(tecI).add(date.durationFrom(tI).divide(dt).multiply(tecIp1));
return tec;
}
@Override
public List<ParameterDriver> getParametersDrivers() {
return Collections.emptyList();
}
/**
* Computes the ionospheric mapping function.
* @param elevation the elevation of the satellite in radians
* @return the mapping function
*/
private double mappingFunction(final double elevation) {
// Calculate the zenith angle from the elevation
final double z = FastMath.abs(0.5 * FastMath.PI - elevation);
// Distance ratio
final double ratio = r0 / (r0 + h);
// Mapping function
final double coef = FastMath.sin(z) * ratio;
final double fz = 1.0 / FastMath.sqrt(1.0 - coef * coef);
return fz;
}
/**
* Computes the ionospheric mapping function.
* @param <T> type of the elements
* @param elevation the elevation of the satellite in radians
* @return the mapping function
*/
private <T extends RealFieldElement<T>> T mappingFunction(final T elevation) {
// Calculate the zenith angle from the elevation
final T z = FastMath.abs(elevation.negate().add(0.5 * FastMath.PI));
// Distance ratio
final double ratio = r0 / (r0 + h);
// Mapping function
final T coef = FastMath.sin(z).multiply(ratio);
final T fz = FastMath.sqrt(coef.multiply(coef).negate().add(1.0)).reciprocal();
return fz;
}
/**
* Lazy loading of TEC data.
* @param recPoint geodetic point of receiver/station
*/
private void loadsIfNeeded(final GeodeticPoint recPoint) {
// Current latitude and longitude of the geodetic point
final double lat = recPoint.getLatitude();
final double lon = MathUtils.normalizeAngle(recPoint.getLongitude(), 0.0);
// Read the file only if the TEC map is empty or if the geodetic point displacement is
// greater than 0.001 radians (in latitude or longitude)
if (tecMap.isEmpty() || FastMath.abs(lat - latitude) > THRESHOLD || FastMath.abs(lon - longitude) > THRESHOLD) {
this.latitude = lat;
this.longitude = lon;
// Read file
final Parser parser = new Parser();
DataProvidersManager.getInstance().feed(supportedNames, parser);
// File header
final IONEXHeader top = parser.getIONEXHeader();
this.startDate = top.getFirstDate();
this.endDate = top.getLastDate();
this.dt = top.getInterval();
this.nbMaps = top.getTECMapsNumer();
this.r0 = top.getEarthRadius();
this.h = top.getHIon();
this.mapping = top.isMappingFunction();
// TEC map
for (TECMap map : parser.getTECMaps()) {
tecMap.put(map.getDate(), map.getTEC());
}
}
checkSize();
}
/**
* Check if the current date is between the startDate and
* the endDate of the IONEX file.
* @param date current date
*/
private void checkDate(final AbsoluteDate date) {
if (startDate.durationFrom(date) > 0 || date.durationFrom(endDate) > 0) {
throw new OrekitException(OrekitMessages.NO_TEC_DATA_IN_FILE_FOR_DATE, supportedNames, date);
}
}
/**
* Check if the number of parsed TEC maps is consistent with the header specification.
*/
private void checkSize() {
if (tecMap.size() != nbMaps) {
throw new OrekitException(OrekitMessages.INCONSISTENT_NUMBER_OF_TEC_MAPS_IN_FILE, tecMap.size(), nbMaps);
}
}
/** Parser for IONEX files. */
private class Parser implements DataLoader {
/** String for the end of a TEC map. */
private static final String END = "END OF TEC MAP";
/** String for the epoch of a TEC map. */
private static final String EPOCH = "EPOCH OF CURRENT MAP";
/** Index of label in data lines. */
private static final int LABEL_START = 60;
/** Kilometers to meters conversion factor. */
private static final double KM_TO_M = 1000.0;
/** Header of the IONEX file. */
private IONEXHeader header;
/** List of TEC Maps. */
private List<TECMap> maps;
@Override
public boolean stillAcceptsData() {
return true;
}
@Override
public void loadData(final InputStream input, final String name)
throws IOException, ParseException {
maps = new ArrayList<>();
// Open stream and parse data
int lineNumber = 0;
String line = null;
try (InputStreamReader isr = new InputStreamReader(input, StandardCharsets.UTF_8);
BufferedReader br = new BufferedReader(isr)) {
final String splitter = "\\s+";
// Placeholders for parsed data
int interval = 3600;
int nbOfMaps = 1;
int exponent = -1;
double baseRadius = 6371.0e3;
double hIon = 350e3;
boolean mappingF = false;
boolean inTEC = false;
double[] latitudes = null;
double[] longitudes = null;
AbsoluteDate firstEpoch = null;
AbsoluteDate lastEpoch = null;
AbsoluteDate epoch = null;
ArrayList<Double> values = new ArrayList<>();
for (line = br.readLine(); line != null; line = br.readLine()) {
++lineNumber;
if (line.length() > LABEL_START) {
switch(line.substring(LABEL_START).trim()) {
case "EPOCH OF FIRST MAP" :
firstEpoch = parseDate(line);
break;
case "EPOCH OF LAST MAP" :
lastEpoch = parseDate(line);
break;
case "INTERVAL" :
interval = parseInt(line, 2, 4);
break;
case "# OF MAPS IN FILE" :
nbOfMaps = parseInt(line, 2, 4);
break;
case "BASE RADIUS" :
// Value is in kilometers
baseRadius = parseDouble(line, 2, 6) * KM_TO_M;
break;
case "MAPPING FUNCTION" :
if (parseString(line, 2, 4).equals("NONE")) {
mappingF = false;
} else {
mappingF = true;
}
break;
case "EXPONENT" :
exponent = parseInt(line, 4, 2);
break;
case "HGT1 / HGT2 / DHGT" :
if (parseDouble(line, 17, 3) == 0.0) {
// Value is in kilometers
hIon = parseDouble(line, 3, 5) * KM_TO_M;
}
break;
case "LAT1 / LAT2 / DLAT" :
latitudes = parseCoordinate(line);
break;
case "LON1 / LON2 / DLON" :
longitudes = parseCoordinate(line);
break;
case "END OF HEADER" :
// At the end of the header, we build the IONEXHeader object
header = new IONEXHeader(firstEpoch, lastEpoch, interval, nbOfMaps,
baseRadius, hIon, mappingF);
break;
case "START OF TEC MAP" :
inTEC = true;
break;
case END :
final double tec = interpolateTEC(values, exponent, latitudes, longitudes);
final TECMap map = new TECMap(epoch, tec);
maps.add(map);
// Reset parameters
inTEC = false;
values = new ArrayList<>();
epoch = null;
break;
default :
if (inTEC) {
// Date
if (line.endsWith(EPOCH)) {
epoch = parseDate(line);
}
// Fill TEC values list
if (!line.endsWith("LAT/LON1/LON2/DLON/H") &&
!line.endsWith(END) &&
!line.endsWith(EPOCH)) {
line = line.trim();
final String[] readLine = line.split(splitter);
for (int i = 0; i < readLine.length; i++) {
values.add(Double.valueOf(readLine[i]));
}
}
}
break;
}
} else {
if (inTEC) {
// Here, we are parsing the last line of TEC data for a given latitude
// The size of this line is lower than 60.
line = line.trim();
final String[] readLine = line.split(splitter);
for (int i = 0; i < readLine.length; i++) {
values.add(Double.valueOf(readLine[i]));
}
}
}
}
// Close the stream after reading
input.close();
} catch (NumberFormatException nfe) {
throw new OrekitException(OrekitMessages.UNABLE_TO_PARSE_LINE_IN_FILE,
lineNumber, name, line);
}
}
/**
* Get the header of the IONEX file.
* @return the header of the IONEX file
*/
public IONEXHeader getIONEXHeader() {
return header;
}
/**
* Get the list of the TEC maps.
* @return the list of TEC maps.
*/
public List<TECMap> getTECMaps() {
return maps;
}
/** Extract a string from a line.
* @param line to parse
* @param start start index of the string
* @param length length of the string
* @return parsed string
*/
private String parseString(final String line, final int start, final int length) {
return line.substring(start, FastMath.min(line.length(), start + length)).trim();
}
/** Extract an integer from a line.
* @param line to parse
* @param start start index of the integer
* @param length length of the integer
* @return parsed integer
*/
private int parseInt(final String line, final int start, final int length) {
return Integer.parseInt(parseString(line, start, length));
}
/** Extract a double from a line.
* @param line to parse
* @param start start index of the real
* @param length length of the real
* @return parsed real
*/
private double parseDouble(final String line, final int start, final int length) {
return Double.parseDouble(parseString(line, start, length));
}
/** Extract a date from a parsed line.
* @param line to parse
* @return an absolute date
*/
private AbsoluteDate parseDate(final String line) {
return new AbsoluteDate(parseInt(line, 0, 6),
parseInt(line, 6, 6),
parseInt(line, 12, 6),
parseInt(line, 18, 6),
parseInt(line, 24, 6),
parseDouble(line, 30, 13),
TimeScalesFactory.getUTC());
}
/** Build the coordinate array from a parsed line.
* @param line to parse
* @return an array of coordinates in radians
*/
private double[] parseCoordinate(final String line) {
final double a = parseDouble(line, 2, 6);
final double b = parseDouble(line, 8, 6);
final double c = parseDouble(line, 14, 6);
final double[] coordinate = new double[((int) FastMath.abs((a - b) / c)) + 1];
int i = 0;
for (double cor = FastMath.min(a, b); cor <= FastMath.max(a, b); cor += FastMath.abs(c)) {
coordinate[i] = FastMath.toRadians(cor);
i++;
}
return coordinate;
}
/** Interpolate the TEC in latitude and longitude.
* @param exponent exponent defining the unit of the values listed in the data blocks
* @param values TEC values
* @param latitudes array containing the different latitudes in radians
* @param longitudes array containing the different latitudes in radians
* @return the interpolated TEC in TECUnits
*/
private double interpolateTEC(final ArrayList<Double> values, final double exponent,
final double[] latitudes, final double[] longitudes) {
// Array dimensions
final int dimLat = latitudes.length;
final int dimLon = longitudes.length;
// Build the array of TEC data
final double[][] fvalTEC = new double[dimLat][dimLon];
int index = dimLon * dimLat;
for (int x = 0; x < dimLat; x++) {
for (int y = dimLon - 1; y >= 0; y--) {
index = index - 1;
fvalTEC[x][y] = values.get(index);
}
}
// Build Bilinear Interpolation function
final BilinearInterpolatingFunction functionTEC = new BilinearInterpolatingFunction(latitudes, longitudes, fvalTEC);
final double tec = functionTEC.value(latitude, longitude) * FastMath.pow(10.0, exponent);
return tec;
}
}
/**
* Container for IONEX data.
* <p>
* The TEC contained in the map is previously interpolated
* according to the latitude and the longitude given by the user.
* </p>
*/
private static class TECMap {
/** Date of the TEC Map. */
private AbsoluteDate date;
/** Interpolated TEC [TECUnits]. */
private double tec;
/**
* Constructor.
* @param date date of the TEC map
* @param tec interpolated tec
*/
TECMap(final AbsoluteDate date, final double tec) {
this.date = date;
this.tec = tec;
}
/**
* Get the date of the TEC map.
* @return the date
*/
public AbsoluteDate getDate() {
return date;
}
/**
* Get the value of the interpolated TEC.
* @return the TEC in TECUnits
*/
public double getTEC() {
return tec;
}
}
/** Container for IONEX header. */
private static class IONEXHeader {
/** Epoch of the first TEC map. */
private AbsoluteDate firstDate;
/** Epoch of the last TEC map. */
private AbsoluteDate lastDate;
/** Interval between two maps [s]. */
private int interval;
/** Number of maps contained in the IONEX file. */
private int nbOfMaps;
/** Mean earth radius [m]. */
private double baseRadius;
/** Height of the ionospheric single layer [m]. */
private double hIon;
/** Flag for mapping function adopted for TEC determination. */
private boolean isMappingFunction;
/**
* Constructor.
* @param firstDate epoch of the first TEC map.
* @param lastDate epoch of the last TEC map.
* @param nbOfMaps number of TEC maps contained in the file
* @param interval number of seconds between two tec maps.
* @param baseRadius mean earth radius in meters
* @param hIon height of the ionospheric single layer in meters
* @param mappingFunction flag for mapping function adopted for TEC determination
*/
IONEXHeader(final AbsoluteDate firstDate, final AbsoluteDate lastDate,
final int interval, final int nbOfMaps,
final double baseRadius, final double hIon,
final boolean mappingFunction) {
this.firstDate = firstDate;
this.lastDate = lastDate;
this.interval = interval;
this.nbOfMaps = nbOfMaps;
this.baseRadius = baseRadius;
this.hIon = hIon;
this.isMappingFunction = mappingFunction;
}
/**
* Get the first date of the IONEX file.
* @return the first date of the IONEX file
*/
public AbsoluteDate getFirstDate() {
return firstDate;
}
/**
* Get the last date of the IONEX file.
* @return the last date of the IONEX file
*/
public AbsoluteDate getLastDate() {
return lastDate;
}
/**
* Get the time interval between two TEC maps.
* @return the interval between two TEC maps
*/
public int getInterval() {
return interval;
}
/**
* Get the number of TEC maps contained in the file.
* @return the number of TEC maps
*/
public int getTECMapsNumer() {
return nbOfMaps;
}
/**
* Get the mean earth radius in meters.
* @return the mean earth radius
*/
public double getEarthRadius() {
return baseRadius;
}
/**
* Get the height of the ionospheric single layer in meters.
* @return the height of the ionospheric single layer
*/
public double getHIon() {
return hIon;
}
/**
* Get the mapping function flag.
* @return false if mapping function computation is needed
*/
public boolean isMappingFunction() {
return isMappingFunction;
}
}
}