SaastamoinenModel.java
/* Copyright 2011-2012 Space Applications Services
* Licensed to CS Communication & Systèmes (CS) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* CS licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.orekit.models.earth;
import java.io.Serializable;
import java.util.Arrays;
import org.apache.commons.math3.analysis.BivariateFunction;
import org.apache.commons.math3.analysis.UnivariateFunction;
import org.apache.commons.math3.analysis.interpolation.LinearInterpolator;
import org.apache.commons.math3.analysis.polynomials.PolynomialFunction;
import org.apache.commons.math3.exception.DimensionMismatchException;
import org.apache.commons.math3.exception.InsufficientDataException;
import org.apache.commons.math3.exception.NoDataException;
import org.apache.commons.math3.exception.NonMonotonicSequenceException;
import org.apache.commons.math3.exception.OutOfRangeException;
import org.apache.commons.math3.util.FastMath;
import org.apache.commons.math3.util.MathArrays;
import org.orekit.data.DataProvidersManager;
import org.orekit.errors.OrekitException;
import org.orekit.errors.OrekitMessages;
import org.orekit.utils.Constants;
import org.orekit.utils.InterpolationTableLoader;
/** The modified Saastamoinen model. Estimates the path delay imposed to
* electro-magnetic signals by the troposphere according to the formula:
* <pre>
* δ = 2.277e-3 / cos z * (P + (1255 / T + 0.05) * e - B * tan²
* z) + δR
* </pre>
* with the following input data provided to the model:
* <ul>
* <li>z: zenith angle</li>
* <li>P: atmospheric pressure</li>
* <li>T: temperature</li>
* <li>e: partial pressure of water vapour</li>
* <li>B, δR: correction terms</li>
* </ul>
* <p>
* The model supports custom δR correction terms to be read from a
* configuration file (saastamoinen-correction.txt) via the
* {@link DataProvidersManager}.
* </p>
* @author Thomas Neidhart
* @see "Guochang Xu, GPS - Theory, Algorithms and Applications, Springer, 2007"
*/
public class SaastamoinenModel implements TroposphericDelayModel {
/** Default file name for δR correction term table. */
public static final String DELTA_R_FILE_NAME = "^saastamoinen-correction\\.txt$";
/** Serializable UID. */
private static final long serialVersionUID = 20160126L;
/** X values for the B function. */
private static final double[] X_VALUES_FOR_B = {
0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0
};
/** E values for the B function. */
private static final double[] Y_VALUES_FOR_B = {
1.156, 1.079, 1.006, 0.938, 0.874, 0.813, 0.757, 0.654, 0.563
};
/** Coefficients for the partial pressure of water vapor polynomial. */
private static final double[] E_COEFFICIENTS = {
-37.2465, 0.213166, -0.000256908
};
/** Interpolation function for the B correction term. */
private final UnivariateFunction bFunction;
/** Polynomial function for the e term. */
private final PolynomialFunction eFunction;
/** Interpolation function for the delta R correction term. */
private final BilinearInterpolatingFunction deltaRFunction;
/** The temperature at the station [K]. */
private double t0;
/** The atmospheric pressure [mbar]. */
private double p0;
/** The humidity [percent]. */
private double r0;
/** Create a new Saastamoinen model for the troposphere using the given
* environmental conditions.
* @param t0 the temperature at the station [K]
* @param p0 the atmospheric pressure at the station [mbar]
* @param r0 the humidity at the station [fraction] (50% -> 0.5)
* @exception OrekitException if δR correction term table cannot be loaded
* @deprecated since 7.1, replaced with {@link #SaastamoinenModel(double, double, double, String)}
*/
@Deprecated
public SaastamoinenModel(final double t0, final double p0, final double r0)
throws OrekitException {
this(t0, p0, r0, DELTA_R_FILE_NAME);
}
/** Create a new Saastamoinen model for the troposphere using the given
* environmental conditions.
* @param t0 the temperature at the station [K]
* @param p0 the atmospheric pressure at the station [mbar]
* @param r0 the humidity at the station [fraction] (50% -> 0.5)
* @param deltaRFileName regular expression for filename containing δR
* correction term table (typically {@link #DELTA_R_FILE_NAME}), if null
* default values from the reference book are used
* @exception OrekitException if δR correction term table cannot be loaded
* @since 7.1
*/
public SaastamoinenModel(final double t0, final double p0, final double r0,
final String deltaRFileName)
throws OrekitException {
this(t0, p0, r0,
deltaRFileName == null ? defaultDeltaR() : loadDeltaR(deltaRFileName));
}
/** Create a new Saastamoinen model.
* @param t0 the temperature at the station [K]
* @param p0 the atmospheric pressure at the station [mbar]
* @param r0 the humidity at the station [fraction] (50% -> 0.5)
* @param deltaR δR correction term function
* @since 7.1
*/
private SaastamoinenModel(final double t0, final double p0, final double r0,
final BilinearInterpolatingFunction deltaR) {
this.t0 = t0;
this.p0 = p0;
this.r0 = r0;
this.bFunction = new LinearInterpolator().interpolate(X_VALUES_FOR_B, Y_VALUES_FOR_B);
this.eFunction = new PolynomialFunction(E_COEFFICIENTS);
this.deltaRFunction = deltaR;
}
/** Create a new Saastamoinen model using a standard atmosphere model.
* <p>
* <ul>
* <li>temperature: 18 degree Celsius
* <li>pressure: 1013.25 mbar
* <li>humidity: 50%
* </ul>
* </p>
* @return a Saastamoinen model with standard environmental values
* @exception OrekitException if δR correction term table cannot be loaded
*/
public static SaastamoinenModel getStandardModel()
throws OrekitException {
return new SaastamoinenModel(273.16 + 18, 1013.25, 0.5, DELTA_R_FILE_NAME);
}
/** {@inheritDoc} */
public double calculatePathDelay(final double elevation, final double height) {
// the corrected temperature using a temperature gradient of -6.5 K/km
final double T = t0 - 6.5e-3 * height;
// the corrected pressure
final double P = p0 * FastMath.pow(1.0 - 2.26e-5 * height, 5.225);
// the corrected humidity
final double R = r0 * FastMath.exp(-6.396e-4 * height);
// interpolate the b correction term
final double B = bFunction.value(height / 1e3);
// calculate e
final double e = R * FastMath.exp(eFunction.value(T));
// calculate the zenith angle from the elevation and convert to radians
final double zInDegree = FastMath.abs(90.0 - elevation);
final double z = FastMath.toRadians(zInDegree);
// get correction factor
final double deltaR = getDeltaR(height, zInDegree);
// calculate the path delay in m
final double tan = FastMath.tan(z);
final double delta = 2.277e-3 / FastMath.cos(z) *
(P + (1255d / T + 5e-2) * e - B * tan * tan) + deltaR;
return delta;
}
/** {@inheritDoc} */
public double calculateSignalDelay(final double elevation, final double height) {
return calculatePathDelay(elevation, height) / Constants.SPEED_OF_LIGHT;
}
/** Calculates the delta R correction term using linear interpolation.
* @param height the height of the station in m
* @param zenith the zenith angle of the satellite in degrees
* @return the delta R correction term in m
*/
private double getDeltaR(final double height, final double zenith) {
// limit the height to a range of [0, 5000] m
final double h = FastMath.min(Math.max(0, height), 5000);
// limit the zenith angle to 90 degree
// Note: the function is symmetric for negative zenith angles
final double z = FastMath.min(Math.abs(zenith), 90);
return deltaRFunction.value(h, z);
}
/** Load δR function.
* @param deltaRFileName regular expression for filename containing δR
* correction term table
* @return δR function
* @exception OrekitException if table cannot be loaded
*/
private static BilinearInterpolatingFunction loadDeltaR(final String deltaRFileName)
throws OrekitException {
// read the δR interpolation function from the config file
final InterpolationTableLoader loader = new InterpolationTableLoader();
DataProvidersManager.getInstance().feed(deltaRFileName, loader);
if (!loader.stillAcceptsData()) {
return new BilinearInterpolatingFunction(loader.getAbscissaGrid(),
loader.getOrdinateGrid(),
loader.getValuesSamples());
}
throw new OrekitException(OrekitMessages.UNABLE_TO_FIND_FILE,
deltaRFileName.replaceAll("^\\^", "").replaceAll("\\$$", ""));
}
/** Create the default δR function.
* @return δR function
*/
private static BilinearInterpolatingFunction defaultDeltaR() {
// the correction table in the referenced book only contains values for an angle of 60 - 80
// degree, thus for 0 degree, the correction term is assumed to be 0, for degrees > 80 it
// is assumed to be the same value as for 80.
// the height in m
final double xValForR[] = {
0, 500, 1000, 1500, 2000, 3000, 4000, 5000
};
// the zenith angle in degrees
final double yValForR[] = {
0.0, 60.0, 66.0, 70.0, 73.0, 75.0, 76.0, 77.0, 78.0, 78.50, 79.0, 79.50, 79.75, 80.0, 90.0
};
final double[][] fval = new double[][] {
{
0.000, 0.003, 0.006, 0.012, 0.020, 0.031, 0.039, 0.050, 0.065, 0.075, 0.087, 0.102, 0.111, 0.121, 0.121
}, {
0.000, 0.003, 0.006, 0.011, 0.018, 0.028, 0.035, 0.045, 0.059, 0.068, 0.079, 0.093, 0.101, 0.110, 0.110
}, {
0.000, 0.002, 0.005, 0.010, 0.017, 0.025, 0.032, 0.041, 0.054, 0.062, 0.072, 0.085, 0.092, 0.100, 0.100
}, {
0.000, 0.002, 0.005, 0.009, 0.015, 0.023, 0.029, 0.037, 0.049, 0.056, 0.065, 0.077, 0.083, 0.091, 0.091
}, {
0.000, 0.002, 0.004, 0.008, 0.013, 0.021, 0.026, 0.033, 0.044, 0.051, 0.059, 0.070, 0.076, 0.083, 0.083
}, {
0.000, 0.002, 0.003, 0.006, 0.011, 0.017, 0.021, 0.027, 0.036, 0.042, 0.049, 0.058, 0.063, 0.068, 0.068
}, {
0.000, 0.001, 0.003, 0.005, 0.009, 0.014, 0.017, 0.022, 0.030, 0.034, 0.040, 0.047, 0.052, 0.056, 0.056
}, {
0.000, 0.001, 0.002, 0.004, 0.007, 0.011, 0.014, 0.018, 0.024, 0.028, 0.033, 0.039, 0.043, 0.047, 0.047
}
};
// the actual delta R is interpolated using a a bilinear interpolator
return new BilinearInterpolatingFunction(xValForR, yValForR, fval);
}
/** Replace the instance with a data transfer object for serialization.
* @return data transfer object that will be serialized
*/
private Object writeReplace() {
return new DataTransferObject(this);
}
/** Specialization of the data transfer object for serialization. */
private static class DataTransferObject implements Serializable {
/** Serializable UID. */
private static final long serialVersionUID = 20160126L;
/** The temperature at the station [K]. */
private double t0;
/** The atmospheric pressure [mbar]. */
private double p0;
/** The humidity [percent]. */
private double r0;
/** Samples x-coordinates. */
private final double[] xval;
/** Samples y-coordinates. */
private final double[] yval;
/** Set of cubic splines patching the whole data grid. */
private final double[][] fval;
/** Simple constructor.
* @param model model to serialize
*/
DataTransferObject(final SaastamoinenModel model) {
this.t0 = model.t0;
this.p0 = model.p0;
this.r0 = model.r0;
this.xval = model.deltaRFunction.xval.clone();
this.yval = model.deltaRFunction.yval.clone();
this.fval = model.deltaRFunction.fval.clone();
}
/** Replace the deserialized data transfer object with a {@link SaastamoinenModel}.
* @return replacement {@link SaastamoinenModel}
*/
private Object readResolve() {
return new SaastamoinenModel(t0, p0, r0,
new BilinearInterpolatingFunction(xval, yval, fval));
}
}
/**
* Function that implements a standard bilinear interpolation.
* The interpolation as found
* in the Wikipedia reference <a href =
* "http://en.wikipedia.org/wiki/Bilinear_interpolation">BiLinear
* Interpolation</a>. This is a stand-in until Apache Math has a
* bilinear interpolator
*/
private static class BilinearInterpolatingFunction implements BivariateFunction {
/**
* The minimum number of points that are needed to compute the
* function.
*/
private static final int MIN_NUM_POINTS = 2;
/** Samples x-coordinates. */
private final double[] xval;
/** Samples y-coordinates. */
private final double[] yval;
/** Set of cubic splines patching the whole data grid. */
private final double[][] fval;
/**
* @param x Sample values of the x-coordinate, in increasing order.
* @param y Sample values of the y-coordinate, in increasing order.
* @param f Values of the function on every grid point. the expected
* number of elements.
* @throws DimensionMismatchException if the length of x and y don't
* match the row, column height of f
* @throws IllegalArgumentException if any of the arguments are null
* @throws NoDataException if any of the arrays has zero length.
* @throws NonMonotonicSequenceException if {@code x} or {@code y}
* are not strictly increasing.
*/
BilinearInterpolatingFunction(final double[] x, final double[] y, final double[][] f)
throws DimensionMismatchException, IllegalArgumentException, NoDataException,
NonMonotonicSequenceException {
if (x == null || y == null || f == null || f[0] == null) {
throw new IllegalArgumentException("All arguments must be non-null");
}
final int xLen = x.length;
final int yLen = y.length;
if (xLen == 0 || yLen == 0 || f.length == 0 || f[0].length == 0) {
throw new NoDataException();
}
if (xLen < MIN_NUM_POINTS || yLen < MIN_NUM_POINTS || f.length < MIN_NUM_POINTS ||
f[0].length < MIN_NUM_POINTS) {
throw new InsufficientDataException();
}
if (xLen != f.length) {
throw new DimensionMismatchException(xLen, f.length);
}
if (yLen != f[0].length) {
throw new DimensionMismatchException(yLen, f[0].length);
}
MathArrays.checkOrder(x);
MathArrays.checkOrder(y);
xval = x.clone();
yval = y.clone();
fval = f.clone();
}
@Override
public double value(final double x, final double y) {
final int offset = 1;
final int count = offset + 1;
final int i = searchIndex(x, xval, offset, count);
final int j = searchIndex(y, yval, offset, count);
final double x1 = xval[i];
final double x2 = xval[i + 1];
final double y1 = yval[j];
final double y2 = yval[j + 1];
final double fQ11 = fval[i][j];
final double fQ21 = fval[i + 1][j];
final double fQ12 = fval[i][j + 1];
final double fQ22 = fval[i + 1][j + 1];
final double f = (fQ11 * (x2 - x) * (y2 - y) +
fQ21 * (x - x1) * (y2 - y) +
fQ12 * (x2 - x) * (y - y1) +
fQ22 * (x - x1) * (y - y1)) /
((x2 - x1) * (y2 - y1));
return f;
}
/**
* @param c Coordinate.
* @param val Coordinate samples.
* @param offset how far back from found value to offset for
* querying
* @param count total number of elements forward from beginning that
* will be queried
* @return the index in {@code val} corresponding to the interval
* containing {@code c}.
* @throws OutOfRangeException if {@code c} is out of the range
* defined by the boundary values of {@code val}.
*/
private int searchIndex(final double c, final double[] val, final int offset, final int count) {
int r = Arrays.binarySearch(val, c);
if (r == -1 || r == -val.length - 1) {
throw new OutOfRangeException(c, val[0], val[val.length - 1]);
}
if (r < 0) {
// "c" in within an interpolation sub-interval, which
// returns
// negative
// need to remove the negative sign for consistency
r = -r - offset - 1;
} else {
r -= offset;
}
if (r < 0) {
r = 0;
}
if ((r + count) >= val.length) {
// "c" is the last sample of the range: Return the index
// of the sample at the lower end of the last sub-interval.
r = val.length - count;
}
return r;
}
}
}